ROOFING AND CLADDING ROOFING AND CLADDING NEWELLOGO ROOFING & CLADDING SUPERSPAN PURLINS GREENCOAT PLX STANDING SEAM FATRA SINGLE PLY MEMBRANE RIDGE CAPPING AND SLATE EDGINGS FLASHINGS ACCESSORIES

QUALITY    VALUE    SERVICE

STRUGA METAL GUTTER SYSTEM CUT & FOLD SERVICES EQA_ISO_9001_2015_QAC_Logo steel-construction-institute-sci-logo Conformité_Européenne_(logo).svg

At the core of GreenCoat PLX Pro BT is high-strength 0.6mm steel substrate that is heavily galvanised. It is this high content Zinc galvanised layer that helps offer moisture protection even in harsh environments including coastal locations. The zinc coating protects the steel from corrosion in 2 ways:

1. It is a protective layer keeping oxygen and water away from the steel.

2. It acts as a cathodic protection - the zinc will sacrifice itself and react to form protective components and block corrosion processes at cut edges or in cases of damage through the zinc coating.

 

On top of this is a tough scratch-resistant paint layer that helps offer a protective barrier against moisture and Oxygen.

 

Organic coating of zinc coated sheet takes place in a carefully controlled continuous process. The core coil is cleaned, pre-treated chemically and the paint is then applied with a roller in two-stages, primer and top-coat. The coating is then quenched in the oven between the two coats of paint.

 

The excellent paint properties of GreenCoat PLX Pro BT pre-painted sheet steel lend themselves to roll forming of trapezoidal profiles and the hand working of "Long Strip" roofing as they require more advanced shaping and forming.

COLOUR CHART AND COATING

Properties of Paint Layer                         Test Method                  Data

Paint thickness, nominal                              ISO 2808                          50um

Gloss                                                                EN 13523 - 2                    40

Minimum inner bending radius                  EN 13523 - 7                   Suitable for seaming

Adhesion                                                         EN 13523 - 6                   Satisfactory

Scratch resistance                                         EN 13523 - 12                 Min 35N

Maximum service temperature                                                            100C

Paint Build Up Properties Coating Colour Chart Data Sheets Gallery GREENCOAT PLX & METAL FACADES REACH Compliant Logo ftmrc Logo Coil-Coating-Line ABOUT BENEFITS FACADES COLOURS INSTALLATION INFORMATION

GreenCoat PLX Pro BT matt

Warranty time (years)

Corrosion resistance

UV-resistance

Scratch resistance

Minimum inner bending radius (formability)

Gloss rate: matt/semi-gloss/glossy

Stain resistance

Coating thickness  

 

20 zone 1 / 15 zone 2

RC5

RUV3

35N

1.5 x sheet thickness

10

Very good

36um  

Standard Reverse Side Coating

Technical Properties

Nominal Coating Thickness

Primer

Colour

 

 

12um

7um

Limestone Turquoise