ROOFING AND CLADDING ROOFING AND CLADDING NEWELLOGO ROOFING & CLADDING SUPERSPAN PURLINS GREENCOAT PLX STANDING SEAM FATRA SINGLE PLY MEMBRANE RIDGE CAPPING AND SLATE EDGINGS FLASHINGS ACCESSORIES

QUALITY    VALUE    SERVICE

STRUGA METAL GUTTER SYSTEM CUT & FOLD SERVICES EQA_ISO_9001_2015_QAC_Logo steel-construction-institute-sci-logo Conformité_Européenne_(logo).svg ABOUT STRUGA ELEMENTS OF STRUGA APPLICATION & INSTALLATION Installation Principles Installation Manual Information Gallery

APPLICATION

Struga Metal Gutter System can be installed on any residential building and can also be used in harsh environments including industrial and marine locations.

Basic Principles of Installation

 

  • The eaves should not protrude beyond half the gutter's diameter, gutters should be

          placed below the roof slope extension line. (See sketch)

  • Remember to keep a minimum gutter slope in the direction of the downpipe

          (min 3mm per metre length of gutter)

  • Once finished, remember to clean the entire Struga system of all debris especially

          metal filings and offcuts.  Any remaining debris may rust and damage the coat.

  • Download the Struga installation manual for full installation instructions.

 

*Abrasion tools (e.g angle grinder) must not be used for cutting gutters and pipes. It might damage the protective coat and, as a consequence, void the warranty!

Struga Application Struga Installation STRUGA METAL GUTTER SYSTEM